AM1 Valve Hole Cutting Tool
The TMT AM1 Valve Hole Cutting Tool is to be used to open subsea tree needle valves too deteriorated to operate.
The TMT AM1 Valve Hole Cutting Tool is to be used to open subsea tree needle valves too deteriorated to operate.
The TMT 115mm Wire Rope Cutter Assembly is a heavy-duty guillotine type cutter.
The TMT Annulus Bore Grinding Tool was originally designed to facilitate proper sealing on a re-entry spool annulus bore by removing material from the shoulder of the pocket and leaving a surface finish suitable for sealing.
The 155mm Wire Rope Cutter is designed to cut umbilical cables and hoses and will cut up to 155mm diameter.
The TMT 75mm Wire Rope Cutter Assembly allows the cutter orientation to be easily handled by the ROV manipulator.
The TMT Deck Pack Hydraulic Power Unit (HPU) is a power generation system designed to convert electrical input into a useable hydraulic power for local supply to the ROV and TMS hydraulically operated tools and machinery while on the surface.
The TMT 12″ Adjustable Spool Support Jacking Tool is a water jack that allows ROVs to adjust spool heights subsea.
The Gate Valve Linear Override Tool (GVLOT) is a linear override tool that has the capability to override large gate valves.
The TMT 5.5″ Hub Cleaning Tool provides a means to remove any foreign matter present on a 5.5″ Tubing Hub.