TMT 1.75″ High Flow Hot Stab
The TMT 1.75″ High Flow Hot Stab is a custom designed hot stab.
The TMT 1.75″ High Flow Hot Stab is a custom designed hot stab.
The TMT Tooling Skid is installed underneath the ROV and provides dual hot stab functionality and a hydraulically actuated drawer for tool storage.
The FLX Skid is mounted to the bottom of an ROV by four connector pins.
The TMT Backpack Fluid Transfer Skid allows an ROV to perform fluid injection.
The TMT Acid/Calciwash Injection Shrouds are specifically designed to aid in the dissolving or hard calcareous build up around valves, buckets and Electrical Flying Leads (EFL) connectors.
The Drill Collar Transponder Bucket allows a subsea transducer to be mounted directly onto a section of drill string so that the exact depth of the drill string can be measured using a subsea transponder array.
The Cement Top Up Stab is an ROV operated hot stab with a 2″ bore that can be used to pump cement into the conductor annulus of a wellhead to correct a poor cementing job.
The Temporary Abandonment Cap (TA Cap) is a tool that is installed on top of a subsea wellhead in order to protect the critical surfaces from subsea growth and corrosion.
The TMT Seabed Soil Sampler is one of the simplest forms of seabed sampling.